NEWS | July 30, 2021

Tools: Corrosion Mobile Work Center Kit Discrepancy


Photo Courtesy of TACOM 
 
Soldiers, if your unit has a corrosion mobile work center, NSN 4130-01-531-6862, you’ve probably ordered the posi-vac starter kit, NSN 4130-01-458-8324. It’s also called a 2-inch clear revolution shroud TP style and grinder right angle 12K tool kit.

If you ordered the kit between May 2019 and April 2021, make sure you verify that you received the 2-inch pneumatic 12k grinder power tool.
 
2-Inch Pneumatic 12k Grinder Power Tool
2-Inch Pneumatic 12k Grinder Power Tool

If you didn’t receive it, then you need to send the proof of order, quantity, proof of receipt, a point of contact and a military address to the TACOM Corrosion Prevention and Control (CPC) Office at:
 

The TACOM CPC office will work with the manufacturer to get the missing power tool shipped to your unit.

Army units who ordered the kit after April 2021 or plan to order it in the future should use NSN 4130-01-483-3946. This will ensure the kit comes with the 2-inch pneumatic 12k grinder power tool.

Don’t order the kit using NSN 4130-01-458-8324, because it’s no longer valid.