Maintainers, there’s a configuration change for the current hose and fuel nozzle assembly on your M969-series fuel tankers. The change is required to standardize the hose and nozzle assembly’s configuration.
Here’s a full list of affected fuel tankers.
Fuel Tanker |
NSN 2330- |
M969A1 |
01-155-0048 |
M969A1P1 |
01-527-4879 |
M969A2 |
01-377-9337 |
M969A2P1 |
01-527-4880 |
M969A3 |
01-495-0043 |
M969A3P1 |
01-538-8513 |
Wonder what the new configuration looks like? Here’s a visual of the change.
Hose and fuel nozzle assembly configuration change
Find your vehicle below to get hose and nozzle assembly installation guidance. And don’t forget to follow the safety guidelines in TM 9-2330-330-13 (Dec 15).
Installation for M969A1, M969A1P1, M969A2 & M969A2P1
- Remove the fuel and oil servicing nozzle, NSN 4930-01-022-7901, PN P2056-03-200.
- Remove the pipe bushing, NSN 4730-01-214-7518, PN MS14315-23X.
- Add the fuel and oil servicing nozzle, NSN 4930-01-544-2307, PN 64185.
- Add the quick disconnect coupler, NSN 4730-01-297-3765, PN AE88011P.
- Add the pipe bushing, NSN 4730-00-202-6493, PN MS14315-18X.
- There’s no change to the nonmetallic hose assembly, NSN 4720-01-058-6032, PN 11685953.
Installation for M969A3 & M969A3P1
- Remove the fuel and oil servicing nozzle, NSN 4930-01-290-0756, PN 1290.
- Add the fuel and oil servicing nozzle, NSN 4930-01-544-2307, PN 64185.
- The quick disconnect coupler, NSN 4730-01-297-3765, PN AE88011P, is good to go on your M969A3.
- Add the pipe bushing, NSN 4730-00-202-6493, PN MS14315-18X.
- There’s no change to the nonmetallic hose assembly, NSN 4720-01-058-6032, PN 11685953.
Make a note until TM 9-2330-330-23P (Dec 15) is updated.